OLAMAT

The history of telecommunication began with the use of smoke signals and drums in Africa, Asia, and the Americas. In the 1790s, the first fixed semaphore systems emerged in Europe. However, it was not until the 1830s that electrical telecommunication systems started to appear. This article details the history of telecommunication and the individuals who helped make telecommunication systems what they are today. The history of telecommunication is an important part of the larger history of communication.

Early telecommunications included smoke signals and drums. Talking drums were used by natives in Africa, and smoke signals in North America and China. These systems were often used to do more than announce the presence of a military camp.[1][2]

In Rabbinical Judaism a signal was given by means of kerchiefs or flags at intervals along the way back to the high priest to indicate the goat “for Azazel” had been pushed from the cliff.

Homing pigeons have occasionally been used throughout history by different cultures. Pigeon post had Persian roots, and was later used by the Romans to aid their military.[3]

Greek hydraulic semaphore systems were used as early as the 4th century BC. The hydraulic semaphores, which worked with water filled vessels and visual signals, functioned as optical telegraphs. However, they could only utilize a very limited range of pre-determined messages, and as with all such optical telegraphs could only be deployed during good visibility conditions.[4]


Code of letters and symbols for Chappe telegraph (Rees’s Cyclopaedia)
During the Middle Ages, chains of beacons were commonly used on hilltops as a means of relaying a signal. Beacon chains suffered the drawback that they could only pass a single bit of information, so the meaning of the message such as “the enemy has been sighted” had to be agreed upon in advance. One notable instance of their use was during the Spanish Armada, when a beacon chain relayed a signal from Plymouth to London that signaled the arrival of the Spanish warships.[5]

In 1774, the Swiss physicist Georges Lesage built an electrostatic telegraph consisting of a set of 24 conductive wires a few meters long connected to 24 elder balls suspended from a silk thread (each wire corresponds to a letter). The electrification of a wire by means of an electrostatic generator causes the corresponding elder ball to deflect and designate a letter to the operator located at the end of the line. The sequence of selected letters leads to the writing and transmission of a message.[6]

French engineer Claude Chappe began working on visual telegraphy in 1790, using pairs of “clocks” whose hands pointed at different symbols. These did not prove quite viable at long distances, and Chappe revised his model to use two sets of jointed wooden beams. Operators moved the beams using cranks and wires.[7] He built his first telegraph line between Lille and Paris, followed by a line from Strasbourg to Paris. In 1794, a Swedish engineer, Abraham Edelcrantz built a quite different system from Stockholm to Drottningholm. As opposed to Chappe’s system which involved pulleys rotating beams of wood, Edelcrantz’s system relied only upon shutters and was therefore faster.[8]

However, semaphore as a communication system suffered from the need for skilled operators and expensive towers often at intervals of only ten to thirty kilometers (six to nineteen miles). As a result, the last commercial line was abandoned in 1880.[9]